Home | Dogs Leashes | News | Contact Us
LED Light Dogs Leashes
Walking your dog out in the dark, our LED light dogs leashes can help you to light up your way with high visibility. The light up dogs leashes are made of strong nylon with bright LED bulbs inserted on the leash. The color of the LED lights is able to customize, as well as the size of the dogs leashes. LED light dogs leashes are our patented product. We welcome customers to send requirement for us. Your suggestions will be our inspiration on developing new designs for dog leashes.
 |
 |
 |
Dogs leashes come in variety of designs and colors and they can be made of leather, nylon or other composite materials. Also, the length is one of the important aspects of the dogs leashes. The length of the leash must be chosen according to the size of the dog and it is important because it allows a good control. Dogs leashes should not be either too long or too short. Too long leashes do not provide good control of the pet which can result in unpleasant accidents with more aggressive dogs whereas; too short leashes are uncomfortable for both the dog and the owner. The perfect dogs leashes can restrain the dog but at the same time are not viewed as punishment for the pet.
High quality dogs leashes have a good quality metal clip and they can be made of leather, nylon or even chain. The metal clip must securely fasten to a metal ring on the collar in order to maintain good control of the dog. The material of which the dogs leashes are made of is not of great importance as long as the dogs leashes do not show evidence of wear or fraying. Therefore, dogs leashes should be periodically checked to ensure they are maintained in proper condition.
An important aspect of dogs leashes is their sturdiness. Although rope leashes are quite cheap, they are vulnerable to chewing and fraying and are not amongst the most recommended types of dogs leashes. However, it is considered that a better type of leash is the one made of nylon because this material provides a bit of elasticity which is meant to result in more comfort for the dog. On the other hand, nylon dogs leashes can cause chafe or can cut into the skin of the dog.
 |
 |
 |
Dyeing Leashes
We carefully select the yarns we buy from the market and we only source our materials from well known brands in china to guarantee the finest Leash products. We dye the Leash yarns according to your pantone color desired and guarantee a match as close as 99%.
Warping Leashes
Racks of bobbins are set up to hold the thread while it is rolled onto the warp bar of a loom. Because the thread is fine, often several of these would be combined to get the desired thread count to make a dog Leash.
Weaving Leashes
The major components of the loom are the warp beam, heddles, harnesses, shuttle, reed and take-up roll. In the loom, yarn processing includes shedding, picking, battening and taking-up operations. To make your dogs leashes, the yarn has to be prepared. The weft or filling must be wound tightly on the correct size pirns, quills or bobbins. Weaving Leashes happens at great speed so the yarn must be at the correct tension when it leaves the shuttle. The warp passes through the heddles which stretch it at each pick, and through the reeds which are abrasive. The warp is thus sized, that is coated with a mixture that can include china clay and flour, to give it extra strength and to act as a lubricant, to the dog leash being made. The leash yarns are dressed or wetted while passing through the loom. The warp, hundreds of ends of yarn rolled in parallel, comes on a steal beam. Before weaving can commence each end must be passed through the heddles and reeds: a process known as looming. A skilled weaver can watch and operate up to 6 looms.
Jacquard Leashes
Jacquard weaving makes possible in almost any loom the programmed raising of each warp thread independently of the others. This brings much greater versatility to the weaving Leash process, and offers the highest level of warp yarn control. This mechanism is probably one of the most important weaving inventions as Jacquard shedding made possible the automatic production of unlimited varieties of pattern weaving applied to the dogs leashes. The term "Jacquard" is not specific or limited to any particular loom, but rather refers to the added control mechanism that automates the patterning of the leash.
Screen Printing Leashes
A screen is made of a piece of porous, finely woven fabric called mesh stretched over a frame of aluminum or wood. Screen printing is a Leash printing technique that uses a woven mesh to support an ink-blocking stencil. The attached stencil forms open areas of mesh that transfer ink or other printable materials which can be pressed through the mesh as a sharp-edged image onto a substrate. A roller or squeegee is moved across the screen stencil, forcing or pumping ink past the threads of the woven mesh in the open areas. Depending on the weather, dogs leashes are left hanging to dry aside from dying the dogs leashes directly on the leash printing tables.
Dye-Sublimation Leashes
The dye sublimation printer covers the paper medium in one color; it winds the paper on to the next color panel and partially ejects the medium from the printer to prepare for the next cycle. Most commonly, the entire process is repeated four times in total. A white Leash is then passed through a heat transfer machine, continuously, making a "re-sublimating” process taking the colors from the paper onto the Leash by means of precipitation. By passing the medium paper along with the Leash, the ink on the paper evaporates and then condenses instantly onto the Leash and dries almost instantly thus, the image is transferred to the Leash. As this is operated in a very high temperature and a slight drop of temperature can affect the images, a Leash can only be sublimated on each side at a time. The same process is done onto the other side of the dog leash afterwards.
Leash Cutting
Depending on the design, a Leash is cut at the prescribed length. Heat is applied onto the blades of the cutter to avoid the dogs leashes from shredding afterwards. The cutter of the dogs leashes are not sharp, the heat itself is enough to cut the Leashes.
Dogs Leashes Quality Control
Each process has their production QC officers. QC inspectors are stationed at crucial points to avoid making a defective Leash. Dogs leashes are checked during Weaving and Jacquard processing at the start to finish. A QC officer follows a screen printer to make sure that each passing is exactly on the intended position of the logo. QC officers also check the dogs leashes after they are cut and assembled before going to packing. A random quality inspection is also conducted on the dogs leashes that have been packed before shipment.
Dogs Leashes Assembly
Dogs leashes are brought to this area after cutting. In this area, the dogs Leashes are fitted with the accessories the client prescribed. Gassing, is the process of passing the dogs leashes, as distinct from fabric very rapidly through a series of Bunsen gas flames in a gassing frame, in order to burn off the projecting fibers and threads and to make the dogs leashes fine and smooth and also brighter.